Loading Devices into TapHome
Packet Parser (HTTP, TCP, UDP, FTP, MQTT)
In TapHome, the Packet Parser is a hardware interface used to connect third-party devices to the controller via TCP/IP protocol using WiFi or LAN.
Modbus
Modbus is a simple communication protocol, often used to integrate HVAC equipment.
Air conditioning
Control of air conditioning split units and outdoor units through multiple integration methods including data connections and IntesisBox hardware.
KNX
Bidirectional integration with KNX systems through TapHome KNX Gateway. Use KNX devices in TapHome and expose TapHome devices to KNX/ETS.
DALI
DALI lighting control integration within the TapHome home automation system
Jablotron Alarm
Integration guide for Jablotron 100 alarm system via RS485 gateway. Suitable for status monitoring and automation triggers, with important limitations for time-critical functions.
SIP Video Doorbell
TapHome supports SIP communication with doorbell systems, offering ring notification for iOS and Android devices, 2-way audio, and video stream.
Velux
Integration of Velux motorized skylights into the TapHome system via the KLF 200 interface. Planning and accessories are key.
DMX
Documentation for integrating DMX into TapHome via the TapHome DMX Gateway, including connection steps and setup procedures within the application.